3 Finest Oak Timber Flooring Finish

Oak flooring is included in this category since there is a wide variety of coatings and treatments that can be applied to timber flooring nowadays. The coatings used on timber floors have gone a long way, particularly in the past ten years.

The following is a list of the most prevalent coating choices now available for oak-engineered timber flooring and our expertise with each coating option.

UV Oil That Has Cured

This coating has been offered in Australia for a good number of years. In the plant, UV-cured coatings are sprayed onto oak floorboards, and the boards are then exposed to UV light, which cures the coating. The primary advantage of this coating is a beautiful matte finish that draws attention to the grain. On the other hand, if only a very thin layer of UV-cured coating is placed, it tends to be slightly porous. You need to ensure that you get a coating cured by ultraviolet light and has a generous layer on it. This coating is also an excellent choice for spot maintenance on scratches and the like.

Natural Oil

It’s likely that engineered oak flooring has been treated with a natural oil for as long as they’ve been coated. The majority of the time, this coating is brushed on at the factory, and once it has been placed, it is advised that another coating be rubbed in before it is used. This coating allows the user to get a lovely matte finish, but it also has the potential to require an excessive number of coats of oil to be reapplied on a frequent basis and has the potential to be somewhat more porous than other coating alternatives.

UV Lacquered Oil

Based on our experiences with it over the previous years, this newly introduced coating appears to have several advantages. It is a factory coat that, similar to the UV Cured coat, helps to bring out the wonderful wire-brushing finish that oak timber flooring has, but it does so with a slightly higher gloss level. We have discovered that this coating is somewhat more resistant to moisture than the two other coating possibilities described above; nevertheless, it is somewhat more difficult to do spot repairs with this coating. We discovered that it is an excellent coating that can retain a decent degree of matte finish while extending its life.

Your Call, After All

As with many other aspects, a single solution for the coating might not work for everyone. It is in your best interest to examine the completed floorboard, look at the coating finish, and put it through certain tests to see whether or not it corresponds to the conclusion you want. You should also consult a flooring specialist about the cleaning chemical that would work best on the coating of the oak flooring you have chosen.

It would be best to consider whether your floorboards have a flat or textured finish, what colour you want them to be, and how much natural wood character they have, such as knots and gum veins. These are all things to consider when selecting the next timber floorboards that will suit your home.

Did you learn new things? Find out more about oak timber flooring by contacting us today or check our online store for more details.

Optimized by: Netwizard SEO